
Aluminium fence on a wall: murete and slats built as one
The classic Costa del Sol frontage – a rendered low wall with aluminium slats above – works well only when the wall was designed to carry the fence and the wind it catches.
An aluminium fence on a wall is a boundary in which aluminium slat panels and their posts are fixed on top of, or between pillars of, a low masonry wall (murete), so that the wall forms the base and the slats provide the screening above it.
What is an aluminium fence on a wall?
In short: a murete at the bottom, aluminium slats on top, usually with pillars or posts at regular intervals.
In most Spanish urbanisations the boundary starts with a murete: a low wall of concrete block, often rendered and painted, sometimes finished with a coping (albardilla). On top of it sits the screening part of the fence – here, aluminium slats between posts or between taller masonry pillars.
The wall does several jobs. It gives a solid, continuous base on ground that is rarely perfectly level, keeps soil and irrigation water away from the slats, and provides the formal frontage many communities expect. The slats add height and privacy without the weight and appearance of a full-height wall.
We build both parts. That matters, because the most common problem we see is a fence added to a wall that was never designed to carry it.
New wall or existing wall?
In short: a new murete is designed for the fence from the start; an existing wall may be fine, but only after it has been checked.
New wall. When we build the murete ourselves, the footing, the wall and the anchor points for the posts are designed together. We know what is inside the wall and where the posts are fixed, and we can allow for the wind the slats will catch.
Existing wall. Many clients want to keep the wall they have and simply add slats. That can work well. But a wall built only to stand on its own, without reinforcement where the posts will go, may crack or lean once a tall screen is bolted to it. We check its condition, its thickness, what it is built from and whether it is plumb.
There is one case where we stop: if the wall holds back soil on one side, it is a retaining wall, not a fence base. Assessing it is a job for a technician (an arquitecto, aparejador or ingeniero), not for a fencing contractor. Our guide on fixing to an existing wall explains what we look for, and the specialists on murosdebloquemalaga.eu explain the difference between a garden wall and a retaining wall.

How are the posts fixed to the wall?
In short: either on base plates anchored into the top of the wall, set into the wall as it is built, or between pillars with fixings on the sides.
There are three common ways to connect an aluminium fence to a murete:
- Base plates on top of the wall. The post has a plate that is anchored into the wall. This is fast and neat, but it depends entirely on the quality of the wall where the anchors go.
- Posts set into the wall. When we build a new wall, posts or anchor elements can be set into the wall as it rises, giving a more robust connection.
- Slats between pillars. Taller masonry pillars carry the slats on their sides. This is the most traditional look and spreads the load into the pillars and their footings.
Which one is right depends on the height of the screen, the exposure to wind and the wall itself. On exposed plots, the wind and slatted fences guide explains why fixing details matter so much.
What should you check before building on a wall?
In short: the total height and the materials allowed by the town hall and the community, and who owns the wall if it sits on the lindero.
When slats go on a wall, the overall height is what counts for most rules – wall plus fence. Town halls set limits through their planning rules, and many urbanisations add their own rules for frontages; some require the lower part to be solid and the upper part to be see-through, others regulate colour or material. Ask both before deciding the height. Our guide to urbanisation design rules covers the questions to ask.
If the wall sits on the lindero, it may be shared with your neighbour. Fixing a fence to a shared wall without agreement is a classic source of disputes; agree it in writing first.
How do the wall and slats work together visually?
In short: the wall's render and coping and the slat colour should be chosen together; a white render with anthracite slats is common, but not the only option.
The most familiar combination on the coast is a white or cream rendered murete with dark slats – anthracite or bronze – above. Stone-effect pillars with dark slats, or rendered walls with wood-effect slats, are also popular.
A coping on top of the wall protects the render from water and gives a clean line under the slats. Where the slats meet the pillar, the end profile should be neat and sealed against water. Our guide to colours and finishes helps you put the combination together, and wood tones are covered on the wood-effect aluminium fence page.

What affects the cost of slats on a wall?
In short: whether the wall is new or reused, its length and height, the slat system and the height of the screen, ground, access and removal work.
A fence on a wall is effectively two jobs in one quote: the masonry and the metalwork. We list them separately so you can see what each part involves – footing, block work, render, coping, posts, slats, trims – along with any removal of an old fence and waste.
For an explanation of how fence costs are built up in general, see presupuestovalla.eu. For the factors specific to slat fences, our article on aluminium fence cost in 2026 goes through them one by one.
How we build it – step by step
- Survey and setting out
We measure the line and levels, check any existing wall and agree the position on the lindero.
- Excavation
For a new wall we dig the trench for the footing; for an existing wall we expose and check what we can.
- Footing
We pour the footing for the new murete and pillars.
- Murete and pillars
We build the low wall and any pillars, setting anchor points for the posts where needed.
- Render and coping
Where included, the wall is rendered and capped so water stays out of it.
- Posts
We fix the posts to the wall or prepare the pillar fixings, checking level and plumb.
- Slat panels and trims
We fit the slats, end profiles and caps.
- Clean-up and handover
We clear the site and walk the line with you or send photos.
When is it the right choice – and when not?
A good fit if…
- Street frontages in urbanisations
- Plots with small changes of level along the line
- Owners who want a solid base and a lighter screen above
- Replacing an old fence on a sound existing wall
- Communities that require a solid lower section
Consider another option if…
- Walls that hold back soil (retaining walls)
- Cracked or leaning walls that would need rebuilding anyway
- Shared walls without the neighbour's agreement
- Rural boundaries where a wall is not needed
What affects the cost?
We don't publish fixed prices: every fence is quoted line by line using these factors.
- New wall or reuse of an existing wall
- Length and height of the murete
- Height of the slat screen above
- Pillars or posts, and how they are fixed
- Render, paint and coping
- Slat system and finish
- Ground, slopes and access
- Removal of an old fence or wall
- Licence and community approval
Articles and guides

Aluminium slat fence: privacy for Costa del Sol villas
A clean, low-upkeep screen made of aluminium profiles between posts – one of the most requested fences for modern villas, and one that is only as good as the structure underneath it.
View details →
Wood-effect aluminium fence: the timber look without the upkeep
For owners who like the warmth of wood next to white walls and Mediterranean planting, but do not want to sand and oil a fence every year in Andalusian sun.
View details →Fixing a slat fence to an existing wall: what we check first
Reusing a sound wall is sensible. Bolting a tall screen onto a wall that was never designed for it is one of the most common causes of cracked, leaning fences we are asked to fix.
View details →
Urbanisation design rules: what to check before a new fence
In many Costa del Sol urbanisations the question is not only what the town hall allows, but what the community allows. Getting both answers before you choose a design saves time and arguments.
View details →
Common mistakes when choosing a slat fence – and how to avoid them
Most fence problems are decided before anyone digs a hole. These are the choices we see go wrong most often on the Costa del Sol.
View details →Frequently asked questions
Can you add aluminium slats to my existing wall?
Often yes, after checking it. We look at its condition, thickness, construction and whether it is plumb before recommending how to fix the posts.
What if my wall holds back soil?
Then it is a retaining wall and needs a technician's assessment before anything is added. A fence is not a retaining wall, and we do not offer retaining walls.
Do you build the murete yourselves?
Yes. Building the wall and the fence together is the best way to make sure the wall can carry the posts.
Is the height limit for the wall plus the fence?
In most cases the overall height is what matters, but each town hall and community sets its own rules. Check with both before choosing heights.
Can the posts be fixed on top of a thin wall?
Thin or hollow walls without reinforcement are a weak point for base plates. We may suggest pillars, a different fixing or rebuilding the top of the wall.
Do I need a coping on the wall?
It is strongly recommended. A coping keeps rain out of the top of the wall and protects the render and the post fixings.
Can the wall be rendered in my house colour?
Yes, the render and paint can match your house, within any limits set by your community.
What about a shared wall on the boundary?
Fixing to a shared wall needs your neighbour's agreement. Put it in writing before any work starts.
Can you demolish my old wall if it is not usable?
Removing an old fence is part of our work when we build the new one. For larger demolition jobs we refer you to our demolition partners.
How do you avoid cracks where the posts are fixed?
By designing the fixing with the wall: solid or filled sections where the anchors go, suitable fixings, and a footing sized for the fence above.
Planning a slat fence for your villa?
Send photos of the boundary and the approximate length. We reply with a first assessment and, after a visit, an itemised quote with no commitment.